Back to top
Send SMS Send Inquiry

Our Products

The skill and artistic approach of our adroit craftsmanship has helped us in designing a wide assortment of quality Plywood and other products for valued customers. Our range comprises:

  • Plywood
  • Commercial Plywood
  • Shuttering Plywood
  • Block Board
  • Flush Doors
  • Skin Doors
  • Filmface Ply
  • Particle Board
  • Soft Board/pin Board
  • Prelaminated Particle Board
Some of the highlighting features of our products are:
  • Smooth texture
  • Appealing designs
  • Termite resistant
  • Compact size
  • Light weighted.

NP plywood is made of high quality plantation timber veneers. Both, the inner-core and outer surface is made from superior quality wood and MR grade plywood is bonded by Urea Formaldehyde Resin where as BWR grade plywood is bonded with Phenol formaldehyde resin.

The ply is bonded under high temperature & pressure to keep the bonding intact even for a longer period.

The plywood has strong screw holding capability which make it the most suitable for making any woodwork. NP plywood is resistant to borers, termites and other wood destroying insects.

Plywood IS:303

BWR PLYWOOD IS 303 : 1989


ISI Requirement

Observed Value

Moisture Content Dimension

5% - 15% Length + 6mm, Width+3mm Thickness 6mm 5%, 6mm 10%

8% Within limit

Resistance to water 13 cycles of 8 hr Builling &16 Hr Dryign at 65 oC) Adhesion in piles

Min. Pass Standard


Retic Brending Test

Modulus of Elasticity

along the grain Avg.

across the grain Avg.

Modulus of Rupture

along the grain Avg

across the grain Avg

Min. 5000 N /

Min. 2500 N /

Min. 40 N /

Min. 20 N /

6500 N / sq. mm

3000 N / sq. mm

56 N /

30 N / sq. mm


MR grade is basically used for interior application. BWR grade is used in woodworking like Ship Cabins, Railway Coaches, Bus and Truck Bodies. Kitchen Cabinets, Exhaust Pipes, False Ceilings, Speaker Cabinets, Bathroom Paneling etc.

Block Board IS : 1669

NP Block boards are manufactured from the combination of selected, seasoned, durable hardwood timber batterns, veneers and adhesives. These are bonded with Urea Formaldeyde Resin under high pressur and temperature for MR grade and Phenol Formaldehyde resin for BWP grade. The block boards are resistance to twisting / warping, has superb screw holding & nail holding capability.

The wooden batterns are thoroughly seasoned in scientifically run seasoning kiln plants and then cut with great precision to obtain uniform thickness.

These batterns are systematically arranged and utmost care is taken to avoid any extra gap between the the batterns.

BWP Block Board IS 1659 : 2004


ISI Requirement

Observed Value

Dimensional Changes caused by Humdity

Changes, mm

From 65% RH to 90% RH

+ 1mm Max + 0.50mm

+0.50 mm

From 65% RH to 40% RH

- 1mm Max.


Local Planeness



M the extreme range nf humidity

No de-lamination at the extreme range of humidity

No de-lamination observed

Adhesion of the plies

Minimum pass standard


Resistance to water (72 hours boiling)

No de-lamimination after 72 hours boiling

No de-lamination

Resistance to Micro organisms

No apprectable sign of separation at edges.

No separation at edges

Modules of Elasticity

Min. 5000 N /

6050 N /

Modules of Rupture

Min. 50 N /

61 N /


Furniture, partitions, racks/shelves, shutters, under layer for decorative laminates etc.

Particle Board

NP Particleboard is manufactured by mixing wood particles or flakes together with a resin with a resin and forming the mix into a sheet. The raw material to be used for the particles is fed into a disc chipper. Resin, in liquid form, is then sprayed through nozzles onto the particles. There are serveral types of resins that are commonly used. Urea fromaldehyde resin is used for most non-water resistant boards. Phenol formaldehyde is used for the water proof material. It is dark colored and highly durable. These resins are sometimes mixed with other additives before being applied to the particles. In order to make the final product waterproof, fireproof, inserct proof, or to give it some other quality.

Decorative Plywood IS 1328 : 1996


Isi Requirement

Observed Value

Open Splits

Not more than 150 mm length and 0.5 mm in width rectified with veneer insert bonded with synthetic resin.

No open splits

Torn grain, dead knots, dote, discolouration and sapwood

Free from such defects.

Free from such Defects.

Moisture content

5% - 15%


Water Resistance test (3 cycles of 3 hr Boiling at 60oC &8 Hr Drying at 65 oC)

NO de lamination or blister formation

No de lamination or blister formation

Decorative IS : 1328

Creative usage of wood in various design possibilities can be realized to perfection by using NP decorative plywood, available in a superior wide belt sanding finish. The superior finish of the surface gives the plywood, a natural edge over all the others in creating a classical and functional interior that emanates from the true depth of the imagination. An interior decorated with NP decorative plywood leaves a signature of its own. Another important feature of this decorative plywood is that the look and feel is so rich and full of glamour that it is compared with wine. The older it gets the better it looks. Any dignified hotels, showrooms and homes in India and abroad who do not want to take chance with any other wood variety go for Natural Teak plywood.

Pre-Lam Board IS:12823

NP Laminated Board is a board laminated on both surfaces by synthetic resin impregnated base paper under the influence of heat and pressure. A prelaminated board is classifying into MR and BWR grade.

These grade are further classified in two grades. OSL and BSL based on printing base used during lamination.

The prelaminated board can be used for Computer Table, Telephone Table, TV Trolley, Shop Furniture, Office Interiors, Wall Partitions, Indoor Sports Item Like Carron, Table Tennis etc.

There are shades to suit any kind of ambience you wish to have.

Molded Skin Door MDF, HDF

Whether it is a home or an office, you enter through the door. Thus, doors have an importance in our lives. It protect you as well as it can beautify your dream house. Moulded skin doors are an advanced version of flush door. They get lamiante with MDF and HDF skins, due to which doors get strength and also enhance the beauty of home. NP moulded skin doors come in different appearance according to the end users.

Flush Door IS:2202

NP flush doors are modern, elegant and ready to use that can be easily installed with minimum efforts to protect and beautify your dream home. They are made out of high quality wood to make them exceptionally durable and dimensionally stable with excellent tooling and finishing properties. Obviously, the doors are made with chemically treated seasoned hardwood battens and frames.

The cross bands veneers are uniformly dried to the requisite moisture content. They are then bonded with special quality Phenol formaldehyde synthetic resin as per the guidelines of IS:2202. Concord Flush Doors are treated for total termite and borer protection. The doors can be manufactured according to customized sizes too.

Flush Door IS : 2202 (Part I) : 1999


ISI Requirement

Observed Value


Len gth, width - + 5mm, Thickness - + 1mm

Within limits


Deviation not more than 1mm on a length of 500mm

Deviation below 1mm

General Flatness

Twist, cupping, warping not to exceed 6 mm

Local Planeness

Depth of deviation at any point to be less than 0.5mm

Within limits

Impact Indentation Test to within limits

Depth of Indentation not

Edge Loading Test

Exceed 0.2mm Deflection of edge withmax.

Within limits

Shock Resistance Test

No visible defect after test

No visible defects

Buckling Test

initial deflection - <50

Within limits

Slamming Test

No visible damage after Test

No visible damage

Misuse Test

No deformation after Test

No deformation

Varying Humidity Test

No visible warping, twisting no de-lamimination

No such defects observed

End Immersion Test

No de-lamination at the end

No de-lamimination

Knife Test

Minimum Pass Standard


Glue Adhesion Test

No de-lamimination

No de-lamimination

Screw Withdraw Test

Load to withdraw screw to be more than 1000 N

Load - >1000 N

Quality Conformation

Quality has been the vital factor behind achieving the immense goodwill in the market. It is due to our commitment to delivering quality range in the market which has made us the most preferred choice of numerous customers. Our quality centric approach has helped us in gaining an ISO 9001:2000 & BIS certification that posit Northern Plywood as a credible and reliable name in the industry.

We have a team of quality analysts who rigorously follow Quality Control Paradigm in every business activities. They stringently check each stage of production starts from the procurement of wood to the finished products. In addition, we also conduct a series of test on below mentioned parameters:

  • Design
  • Finish
  • Strength
  • Dimensional accuracy.

Modern Infrastructure

We have modern infrastructure which is equipped with technologically advanced machines and equipment for preparing a quality range of plywood. The advanced technology and cutting edge machines in our unit assist us in carrying out bulk production smoothly. We have divided our infrastructure into manufacturing, quality testing and R&D units. These departments work in coordination to deliver not anything but qualitative range to our valued customers.

Some of the machines installed in our unit consist of:

  • Cutting machines
  • Welding machines
  • Bending machine
All these machines are of latest standard and are highly capable of producing flawless and excellently finished  products. Also, we understand the growing demands of the market and manufacture the range accordingly.

"Plywood Sheet Manufacturer, Supplier and Exporter in Nainital, Uttarakhand India."

"Northern Plywood Product offers best Plywood Prices in the market."